Civil standard drawings
Standard drawings define the materials, set out standard construction details and provide general design data for NT Government assets.
Listed below are the standard drawings for:
- project signs
Civil standard drawing register
Read the civil standard drawing register .
Current civil standard drawings
Below are the current civil standard drawings.
|CS-3450||NTG branding signage jointly funded - roads - removed on 6 January 2022|
|CS-3451||NTG branding signage NTG funded - road and buildings|
|CS-3452||NTG branding signage jointly funded - buildings - removed on 12 December 2019|
|CS-3453||Fully Australian Government funded projects R2R and black spot programmes - removed on 6 January 2022|
|CS-3454||Shared government funded projects bridges, heavy vehicle safety and national stronger regions programmes - removed on 6 January 2022|
|CS-3455||Fully Australian government funded commemorative plaque|
|CS-3456||Jointly funded commemorative plaque|
|CS-3457||Stimulus program sign 600mm x 900mm - removed on 6 January 2022|
|CS-3458||Stimulus program sign 900mm x 1200mm - removed on 6 January 2022|
|CS-3459||Project signs program selection|
|CS-3460||Infrastructure investment program project sign size 3000mm wide x 1500mm high|
|CS-3461||Infrastructure investment program project sign (where physical space is limited) size 2000mm wide x 1400mm high|
|CS-3462||Infrastructure investment and stimulus program project sign size 900mm wide x 1200mm high|
|CS-3463||Infrastructure investment and stimulus program project sign (limited space area & speed<80km/hr) size 600mm wide x 900mm high|
If you have any questions about civil standard drawings, contact Sam Hatzivalsamis by:
Last updated: 10 May 2022
Share this page:URL copied!